Water Circulation Rollover Car Wash Machine For Sale water circulation car wash machine,rollover car wash machine for sale,rollover car wash machine equipment,rollover car wash machine manufacturer in china Zhengzhou Shinewash Technology Co.,Ltd , https://www.shinewashtech.com
Upgrading the grille on your Toyota Tundra is one of the simplest modifications you can make to enhance its appearance. Whether your current grille is damaged or you simply want a fresh look, switching to the Tundra TRD Pro grille can add a sportier and rugged aesthetic to your truck. The TRD Pro grille consists of two main components: the lower main grille and the upper hood bulge trim.
Take a moment to verify your vehicle's paint code before purchasing the grille. This information is typically found on a sticker located on the driver’s side door jamb, beneath the barcode. The code is crucial for ensuring that the grille matches your truck's factory paint precisely.
Here’s a detailed guide on how to install the TRD Pro grille:
### Replacing the Upper Hood Bulge Trim:
Start by opening the hood and releasing the latch. With the hood safely raised using the gas struts, identify the three 10mm bolts securing the upper hood bulge trim. Remove these bolts using a ratchet, extension, and 10mm socket. Carefully lower the hood but avoid fully closing it. Next, gently pull the old trim outward to disengage the retaining pins. Align the new trim’s pins with the corresponding holes in the hood, then press it firmly into place until the pins click. Secure the trim by reinstalling the bolts and fully opening the hood.
### Installing the Lower Main Grille:
Begin by removing the four 10mm bolts at the top of the grille. Use a flat-blade screwdriver to release the black push clips located on both sides near the top. Lift the grille upward to detach the white plastic grommets. Underneath, find the release tabs next to the headlights and push them down while pulling the grille outwards. Once the locking tab at the bottom is released, gently pull the entire grille away from the bumper. For the new grille, align the locking tabs at the bottom corners with the holes in the bumper, then insert the release tabs into the slots under the headlights. Push the grille upward, engaging the retaining pins along the bottom edge. Ensure the top of the grille clears the white grommets, and reinsert the push clips. Finally, secure the grille by tightening the 10mm bolts.
The TRD Pro grille not only enhances your truck’s style but also maintains a factory fit and finish. Each grille is pre-painted to match your vehicle’s exact color, so double-check the paint code to ensure compatibility. Enjoy the sleek and aggressive look of your newly upgraded Toyota Tundra!
For more customization ideas or interesting facts about your Tundra, explore our other blog posts.