Precautions for daily maintenance of hydraulic cylinders
For Liugong Cylinder Seal Kit,For Liugong Swing Motor Seal Kit,Center Joint Seal Kit For Liugong,Center Joint Seal Kit Liugong Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com
Main Features
JSJ5, flowmeter adopts advanced technology, which can be widely used for different fuel dispensers. With advantage of high flow, long working life, high accuracy, firm structure, easy installation, etc., it can be the best choice of fuel dispenser component.
Discharge rate of each revolution
0.473L
Flow range
5-100L/min
Working pressure
0.12MPa-0.35MPa
Accuracy
±0.2%(5L/min-100L/min)
Repeat error
≤0.1%
Working life
≥10000000L
Â
1. Regularly inspect the sealing components of the hydraulic cylinder, such as O-rings and gaskets, to ensure that they are intact and undamaged. If there is wear or aging, they should be replaced in a timely manner.
2. Regularly check the liquid level of the hydraulic cylinder and keep it within the specified range. If the liquid level is too low, add hydraulic oil in a timely manner.
3. Regularly inspect the connection parts of the hydraulic cylinder, such as oil pipes and joints, to ensure their tightness and reliability. If there is any looseness, it should be tightened in a timely manner.
4. Regularly clean the outer surface of the hydraulic cylinder to prevent dust, sand, and other debris from entering the interior of the cylinder and affecting its normal operation.
5. Regularly inspect the surface of the piston rod of the hydraulic cylinder, and promptly repair or replace it if there are scratches or wear.
6. Regularly inspect the hydraulic system of the hydraulic cylinder, and promptly handle any problems such as oil leakage or unstable pressure.
7. When the hydraulic cylinder is not in use for a long time, its hydraulic oil should be drained to avoid oil aging, deterioration, and affecting the normal operation of the hydraulic system.
8. When repairing or replacing hydraulic cylinders, attention should be paid to safety to avoid sudden movement or pressure release of the hydraulic cylinder, which may cause personal injury or equipment damage.