Pond Copper Wire Self-Priming Auto Water Pump with Switch Box
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application

Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump   Â



Item | Description | Item | Description | Item | Description | Item | Description |
11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
17 | O-ring | 27 | Terminal Box | 37 | O-ring | Â | Â |
18 | Screw | 28 | Screw | 38 | Fan | Â | Â |
19 | Front Plate | 29 | Capacitor | 39 | Screw | Â | Â |
20 | Screw | 30 | Terminal Box | 40 | Fan Cover | Â | Â |
Production Work-flow Chart of Pump
Â

                           About Us
                                 Â

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>>Â Impeller: stainless steel impeller, brass impeller, ppo impeller
>>Â Mechnical Seal: carbon / ceramic / Stainless Steel
Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>>Â Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>>Â AISI 304 shaft or 45#Â carbon steel
Working Range
>> Liquid: clean liquids without suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44
Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time.Â
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>>Â The flow priority system, electric pump use acme, turely achieve the full pressure.Â
Application

Model | HP | W | Current (A) | Capacitor (uf) | H.Max (M) | Q.Max (L/min) | Pipe Size | Pressure Set (bar) | Tank (L) |
GDHm-125A | 0.15 | 125 | 1.5 | 8 | 30 | 32 | 1"X1" | 1.5 | 2 |
GDHm-250A | 0.35 | 250 | 3.5 | 10 | 32 | 35 | 1"X1" | 1.8 | 2 |
GDHm-370A | 0.5 | 370 | 4.5 | 10 | 36 | 36 | 1"X1" | 2.2 | 2 |
GDHm-550A | 0.75 | 550 | 2.9 | 15 | 45 | 55 | 1"X1" | 2.6 | 2 |
GDHm-750A | 1 | 750 | 3.5 | 20 | 55 | 58 | 1"X1" | 2.8 | 2 |
GDHm-1100A | 1.5 | 1100 | 4.5 | 25 | 62 | 66 | 1"X1" | 3.2 | 2 |
GDHm Automatic Self-priming Pump   Â



Item | Description | Item | Description | Item | Description | Item | Description |
11 | Press Sensor | 21 | Bearing | 31 | Screw | 41 | O-ring |
12 | Screw | 22 | Shaft Key | 32 | Cable Plug | 42 | Pressure Tank |
13 | Inlet Rubber | 23 | Rator | 33 | Cable Net | 43 | Pressure Sensor |
14 | Stainless steel Inlet | 24 | Bearing | 34 | Screw | 44 | Cover |
15 | O-ring | 25 | Stator | 35 | PC Clip | 45 | Plastic Base |
16 | Screw | 26 | Motor House | 36 | Volatede Regulator | 46 | Screw |
17 | O-ring | 27 | Terminal Box | 37 | O-ring | Â | Â |
18 | Screw | 28 | Screw | 38 | Fan | Â | Â |
19 | Front Plate | 29 | Capacitor | 39 | Screw | Â | Â |
20 | Screw | 30 | Terminal Box | 40 | Fan Cover | Â | Â |
Production Work-flow Chart of Pump
Â

                           About Us
                                 Â

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
H finned tube is called square finned tube, there are two types of H finned tube, one is a single tube, usually called square finned tube, the other is a double tube, usually called rectangular finned tube. And according to customer requirements manufacturing. Due to its rectangular shape, it provides a larger surface area than spiral finned tubes. Because of the larger surface area available, these finned tubes are primarily used in air heating applications to reduce the overall size of the equipment.
H-shaped finned tubes have a high area expansion rate, less dust accumulation, and high heat transfer efficiency. In the case of equivalent heat transfer capacity, the heat exchanger can occupy the smallest space, and can minimize high-grade materials (ie, pressure tubes) The amount of use, and more use of low-grade materials,( 1919113,fins). For new engineering projects, the height of the heat exchanger arrangement can be reduced, the overall weight is greatly reduced, the load of the suspension system is reduced, and the overall cost is reduced; for the renovation project, as much heat exchange area as possible can be arranged in a limited space to reduce the exhaust temperature , Improve the efficiency of waste heat recovery or increase the maintenance space for easy maintenance.
H/HH Type Fin Tube,Square Steel Pipe,Seamless Square Tubing,Square Galvanized Pipe,Seamless Square Steel Tube
Murphy Thermal Energy Co., Ltd. , https://www.murphyfinnedtube.com