Pulse Deduster Pulse Duster Series,Removable Deduster,Pulse Type Dust Collector,Pulse Deduster Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com
Brief Introduction
NBZ series pillar slewing jib crane generally used in machine tools finishing area, make sure load materials accurate lift and placed, stable move to anywhere where within jib arm cover radius. It is a quite smart material handling equipment where workshop has intense space or in non-steel framed warehouse.
Product AdvantageÂ
Long design jib length, fulfill large working area requirements.
Easy control with high performance as well as reliable in the same time.
Full length jib arm design with rated loading capacity.
General industry application
Crane to serve machine tools fabrication area.
Crane to serve gear assembly station.
Crane to serve warehouse storage area.
Share your lifting business with us to find featured lifting solutions.
The pulse precipitator is a new high efficiency pulse dust remover based on the MC-I type. It has the advantages of high purification efficiency, large gas handling capacity, stable performance, long life of filter bags, easy operation and low maintenance workload.
Product introduction
The pulse duster is a new type of high efficient pulse duster based on the Bag Filter . It combines the advantages of all kinds of pulse blowing duster in the split chamber. It overcomes the shortcomings of the low strength of the chamber and the uneven distribution of the air, and expands the application range.
The pulse Dust Collector is when the dust gas enters the dust collector from the inlet air inlet. First, it meets the inclined plate and baffle in the middle of the inlet and outlet. The air flow turns into the ash bucket. At the same time, the velocity of air flow slows down. Because of the inertia effect, the coarse particle dust in the gas is directly inflow into the ash bucket. With the effect of precollecting dust, the air flow into the ash bucket is later folded and the filter bag dust which is equipped with a metal skeleton is captured on the outer surface of the filter bag. The purified gas enters the cleaning room on the upper part of the filter bag and comes to the outlet. The dust gas is attached to the filter bag through the process of purifying the filter bag, and as the time increases. The dust on the filter bag is more and more, increasing the resistance of the filter bag, resulting in the gradual reduction of the air flow rate. It is the normal work to control the resistance in a certain range (140--170 millimeter water column). Once the range is beyond the range, the filter bag must be cleaned, and the pulse control valve is triggered in the order of pulse control to open the pulse valve and the pressure inside the air bag. The shrinkage air is sprayed into the corresponding filter bag by the Venturi Tube, and the filter bag expands rapidly at the moment, making the dust attached to the surface of the filter bag fall off, and the filter bag is restored to the initial state. The dust falls into the ash hopper and is discharged through the ash disposal system. Therefore, the dust deposited on the filter bag is periodically cleaned by impulse injection, so that the purified gas passes through normally and ensures the operation of the dust removal system.