China-One-Piece-Type-Autoloader
1. Imported high speed commutator motor, small cubage and strong suction.
2. Connection between operation controller and electric controll box free and convenient operation.
3. The micro computer controls and the accurate action.
4. Out hanged air storage device to thoroughly clean the dust on the strainer.
5. Electronic action detector and low fault rate.
6. Multi fault indicator lamp to facilitate the customer knowing the reason and handling in time.
|  Model |  Motor |  Convey Capacity |  Converying Height |  Material Hopper Volume | Conveying Tube Calibre |  Extenal Dimension | Weight (Kg) |
| Â 300C | Â 1000W | Â 250Kg/hr | Â 4.5m | Â 6L | Â 38mm | Â 360*260*500 | Â 10 |
| Â 300CE | Â 1000W | Â 250Kg/hr | Â 4.5m | Â 6L | Â 38mm | Â 360*260*600 | Â 10 |
| Â 360 | Â 1100W | Â 300Kg/hr | Â 4.5m | Â 6L | Â Â 38mm | Â 320*260*570 | Â 12 |
| Â 360E | Â 1100W | Â 300Kg/hr | Â 4.5m | Â 6L | Â 38mm | Â 320*320*600 | Â 13 |
| Â 390 | Â 1180W | Â 350Kg/hr | Â 4.5m | Â 12L | Â 38mm | Â 400*300*500 | Â 19 |
| Â 390E | Â 1180W | Â 350Kg/hr | Â 4.5m | Â 12L | Â 38mm | Â 400*300*500 | Â 19 |
| Â 400 | Â 750W | Â 350Kg/hr | Â 4.5m | Â 12L | Â 38mm | Â 400*300*500 | Â 25 |
Laser welded finned tubes are the most technologically advanced products with irreplaceable advantages
1. The thickness of the base tube can be 0.8-1.5mm, and the thickness of the fin can be 0.3-1mm, which greatly saves the material cost compared with other processes.
2. High penetration rate, can prevent crevice corrosion, prolong service life and reduce heat transfer resistance.
3. It is easy for secondary processing, and can be directly coiled and bent.
4. Breaking through the material limitation, different materials can be used for processing.
Laser Welded Finned Tubes,Laser Welded Finned Tube,Laser Welded Spiral Finned Tube,Stainless Steel Laser Welded Finned Tube
Wuxi Mcway Equipment Technology Co., LTD , https://www.mcwayfinnedtube.com