The 2V130 series solenoid valves are part of the 2V series, available in sizes ranging from 1/8" to 1". These 2/2 way valves are designed to be compact, lightweight, and energy-efficient, making them suitable for operation under a pressure of up to 1.0 MPa. **Technical Specifications:** - **Medium:** Air, Water, Oil (viscosity below 20cst) - **Temperature Range:** -10°C to 80°C - **Mode of Operation:** Pilot Operated - **Pressure:** Normally Closed (N/C): 8 bar **Key Features:** - **Body Material:** Brass - **Sealing Material:** NBR - **Protection Class:** IP65 - **Voltage Range:** ±10% - **Power Consumption:** AC: 7VA / 60Hz, 9VA / 50Hz; DC: 6W - **Insulation Class:** F - **Minimum Excitation Time:** 0.05 seconds **Notes:** - If the thread is different from G connection, please specify it. - If flange connection is required, indicate "F" in your order. - For pressures between 0.3–16 bar, please mention this in your order. **Model Table:** | Model | 2V025-06 | 2V025-08 | 2V130-10 | 2V130-15 | 2V250-20 | 2V250-25 | |---------------|----------|----------|----------|----------|----------|----------| | **Working Medium** | Air, Water, Steam | Air, Water, Steam | Air, Water, Steam | Air, Water, Steam | Air, Water, Steam | Air, Water, Steam | | **Motion Pattern** | Direct Drive Type | Direct Drive Type | Guided Type | Guided Type | Guided Type | Guided Type | | **Type** | Normally Closed | Normally Closed | Normally Closed | Normally Closed | Normally Closed | Normally Closed | | **Flow Rate Aperture (mm)** | 2.5 | 2.5 | 13 | 13 | 25 | 25 | | **Cv Value** | 0.23 | 0.23 | 6.2 | 6.2 | 23 | 23 | | **Pipe Bore** | 1/8" | 1/4" | 3/8" | 1/2" | 3/4" | 1" | | **Fluid Viscosity** | ≤ 20 CST | ≤ 20 CST | ≤ 20 CST | ≤ 20 CST | ≤ 20 CST | ≤ 20 CST | | **Working Pressure** | 0–8 bar | 0–8 bar | 0.5–7 bar | 0.5–7 bar | 0.5–7 bar | 0.5–7 bar | | **Max Pressure Resistance** | 12 bar | 12 bar | 10.5 bar | 10.5 bar | 10.5 bar | 10.5 bar | | **Operating Temperature** | -10–80°C | -10–80°C | -10–80°C | -10–80°C | -10–80°C | -10–80°C | | **Voltage Range** | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% | | **Protection Class** | IP65 | IP65 | IP65 | IP65 | IP65 | IP65 | | **Power Consumption** | 7VA / 60Hz, 9VA / 50Hz | 7VA / 60Hz, 9VA / 50Hz | 7VA / 60Hz, 9VA / 50Hz | 7VA / 60Hz, 9VA / 50Hz | 7VA / 60Hz, 9VA / 50Hz | 7VA / 60Hz, 9VA / 50Hz | | **Insulation Class** | F | F | F | F | F | F | | **Body Material** | Aluminum or Brass | Aluminum or Brass | Brass | Brass | Brass | Brass | | **Seal Material** | NBR/Viton | NBR/Viton | NBR | NBR | NBR | NBR | | **Minimum Excitation Time** | 0.05 s | 0.05 s | 0.05 s | 0.05 s | 0.05 s | 0.05 s | **Product Images:** [Image of 2V130 Series Solenoid Valve](http://i.bosscdn.com/uploads/f4/a5/50/6c1451a0308842c72d2ebad7cb.jpg) [Image of 2V130 Series Solenoid Valve](http://i.bosscdn.com/uploads/e2/8b/04/c068c4fe964a3b2b6c15122948.jpg) This product is ideal for industrial and water-related applications, with options for various port sizes such as 1/8", 1/4", 1/2", 3/4", 3/8", and 1". It complies with DIN standards and is certified under ISO 9001. The valve is also compatible as a substitute for SMC models and is packaged in PP bags, boxes, and cartons. The trademark is REGIS, and the origin is Ningbo, China. The HS code is 8481804090.

CP96 Pneumatic Cylinder Barrel

CP96 series ISO cylinder: standard single rod double acting Air Cylinder Tube
Standard model: ISO 15552
Easy adjustment of buffer valve Pneumatic Cylinder Tube
CNOMO, D-M9 â–¡ and A9 â–¡ are arranged with grooves on 4 sides

● With magnetic switch (C96SD series: C96SD, C96KD, C96YD)

CP96

The CP96 series is a cylinder produced by SMC that meets the 1S0 standard. Its cylinder tubes are usually made of aluminum alloy and have certain characteristics and advantages. Here is some information about the CP96 series cylinders:

Characteristics of SMC CP96 series cylinders:

Lightweight: Compared to the previous generation product C95, the CP96 has reduced its weight by approximately 10%.

Installation flexibility: Through special designs such as A9/M9 slots and CNOMO slots, the installation of magnetic switches is made more flexible. Compliant with ISO standard: These cylinders comply with ISO 15552 standard, which means they have standardized dimensions and interfaces for easy replacement and integration. New buffering system: adopting a new buffering method of air buffering combined with rubber buffering sheets, which helps reduce the noise generated when the piston stops and shorten the production cycle time. Accuracy improvement: By improving the accuracy of the liner and piston rod, reducing tolerances, the deflection of the piston rod is reduced, and the overall accuracy and durability are improved. Regarding cylinder pipes:

Material: Usually made of aluminum alloy, it has good strength to weight ratio and corrosion resistance.

·Surface treatment: Aluminum alloy cylinder pipes may undergo anodizing treatment to enhance surface hardness and wear resistance,

Size: Depending on different application requirements, the diameter range of cylinder pipes can vary from 32mm to 100mm

Length: Some suppliers offer standard length options of 2 meters or 2.4 meters.

CP96 Pneumatic Cylinder Barrel,CP96 Pneumatic Cylinder Tube,CP96 Pneumatic Cylinder Tubing,CP96 Pneumatic Cylinder Pipe

Foshan Weiyingjia Technology Co., Ltd , https://www.wyspneumatic.com