Introduction: The common problems in the use of steel pipe straighteners are nothing more than those. Here we explain to you how to solve these common problems.

Fault Analysis and Treatment of Pipe Straightening Machine

One of the problems that steel pipe straighteners often encounter is that they do not straighten steel pipes. The main reason for the various situations is that the cross-thread amount of the two hubs of the rotary hub is too large or too small; the diameter of the steel pipe is too thin or the pipe wall is too thick. We only need to adjust the amount of staggering between the two diagonal main rollers. If it is because of the small diameter or the wall thickness, we can adjust it again. To ensure the quality of steel pipe. In addition, excessive staggering of the main leveling roller may also cause indentation on the surface of the adjusted steel pipe, which is also a concern.

Another problem that will be encountered is that the steel pipe is crushed. This situation is generally due to feed roller adjustment pressure is too large or the pipe diameter is too thick. At this time, it is necessary to adjust to the proper pressure. The normal thickness of the steel pipe and the thinner steel pipe are not the same as the pressure, and the pressure is properly adjusted. In the process of use, in fact, as long as the adjustment of the steel pipe to the machine is appropriately adjusted, it is often possible to solve these problems. First of all, we must know every function and description of the machine and understand the meaning behind each parameter. Good remedy.

Stainless steel Exhaust Tip

Adding high performance mufflers can give you added power and a much better sound over stock mufflers. SS304 stainless steel performance universal muffler, with high-temperature resistant ceramic fiber and stainless mesh wrapped around the perforated hole.Inlet diameter 2", 2.5", 3" outlet: single tip, turndown tip, twin tip, twin bend tip.resonated tip, silencer tip.


muffler
XS high performance SS304 stainless steel universal mufflers can give you added power and a racing sound over stock mufflers. with high-temperature resistant ceramic fiber and stainless mesh wrapped around the perforated hole.

stainless steel flexible pipe, Universal design, Easily installed: welded to the exhaust system or tube ends can be added for clamping installations, to connect manifold and muffler.

Parts For Exhaust System

Exhaust System Parts, Exhaust Tip, Flex Pipe

Ningbo Xiangsheng Auto Parts Co., Ltd. , http://www.partsaa.com