Brass Safety Valve 1/2′′-3/4′′inch for Heating System

The brass safety valve is ideal for use in heating systems such as pressurized solar water heaters, gas heaters, electric water heaters, fuel-based water heaters, heat pump water heaters, and other sensitive heating devices. It can be installed on boilers or hot water tanks to ensure the system's safety by releasing pressure at a set temperature and pressure. The valve should be mounted on the top or side of the water heater, with the temperature sensing element fully submerged within the first 6 inches of the tank. A discharge pipe must be connected below the relief valve, and its terminal end should be positioned more than 6 inches away from the floor drain for easy maintenance and observation.