Serrated Slat
1. Our combine harvester/ Agriculture machinery parts channel steels are apply to John Deere, Class, New Holland Serrated Slat, Combine Serrated Slat, Channel Steel Ningbo Combine Machinery Co.,Ltd. , https://www.combine-harvester-parts.com
2. Neutral Cartons and Pallets for free fumigation if there is no
special requirments. But it is available to provide colourful package
according to your design or we make design for your brand if required.
In addition to molybdenum ores containing large amount of molybdenite and gangue, often also associated copper, lead, molybdenum, iron and other non-sulfide minerals. If the molybdenum ore is not strictly inhibited during flotation, they will be enriched in molybdenum concentrate to varying degrees, so that the product contains more than the standard. In 1979, in response to environmental protection requirements, Huairou Molybdenum Mine stopped adding cyanide, sulfide and other sulfide mineral inhibitors. The copper content of the molybdenum concentrate increased to 2.97%, which is 100 times more concentrated than the copper content in the ore (0.03% only). .
Most of the by-produced molybdenum concentrates are from copper-molybdenum ore. The valuable components are firstly copper minerals, which are obtained from copper-molybdenum mixed concentrates (usually containing 130% to 42% copper and 0.2% to 3% molybdenum). Qualified molybdenum concentrate, separation of copper and molybdenum is extremely important.
In molybdenum concentrate, non-molybdenum sulfide impurities are different from gangue, which not only reduces the molybdenum content of molybdenum concentrate (this effect is much smaller than the influence of gangue), but also in the deep processing of molybdenum concentrate. Molybdenum ore participates in the reaction together, affecting the quality of the product and causing great harm.
When molybdenum concentrate roasting, silicon impurities almost no change, but the metal sulfide (MeS) simultaneously with the oxidation of molybdenite oxidation to form the corresponding oxides (MeO). Firing the same environment, and then these metal oxides will oven gas with SO 3, P 2 O 5, As 2 O 3 ... the reaction to form the corresponding sulfates, phosphates, arsenates ....... Many salts are thermally stable, and they enter the molybdenum calcination to increase the content of harmful impurities such as S, P, and As in the molybdenum calcine. In the same roasting environment, these metal oxides will then react with the newly formed MoO 3 to form some stable molybdate. When preparing ammonium paramolybdate by ammonia leaching with these molybdenum-containing molybdenum calcine, CaMoO 4 is insoluble in ammonia water, and Fe 2 (MoO 4 ) 3 is insoluble in ammonia water, and they remain in the ammonia leaching residue and are discarded. Greatly reduce the ammonia leaching recovery rate of molybdenum. When high-purity molybdenum trioxide is produced by the sublimation method using these molybdenum-containing molybdenum calcines, the boiling points of PbMoO 4 and Bi 2 (MoO 4 ) 3 are consistent with the sublimation temperature of MoO 2 , which leads to an increase in lead and antimony content in the product. High and significantly affects the quality of molybdenum powder... The hazards of non-molybdenum sulfide impurities are far more than these.
For this reason, the content limit of non-molybdenum sulfide impurities is very strict in the quality standards of molybdenum concentrates formulated by various molybdenum countries or companies.
Common non-molybdenum sulfide impurities in molybdenum beneficiation are mainly copper minerals, lead minerals, iron minerals, especially chalcopyrite and chalcopyrite.