Explain how to repair the failure of the thermal shock test chamber compressor in time?
Ductile
Spindle Assembly is a crucial part for your lawn
mower cutting deck that work together with the pulleys and belts to
perform clean and even mowing.
It is combined from bearings, spindle housings, spindles, tubes, dust cap, screw nuts, etc.
Which kind of spindle assembly does QFQP
produce?
We produce various kinds of spindle
assembly, especial for riding mower (with aluminum/ductile
iron housings). All parts assembled by our experienced workers.
Where are the products sold?
Main of our customers is from USA, CANADA.
Why choose QFAP?
We have specialized in producing high
precision mechanical parts more than 10years, got 6years experience on mower Deck Spindle assembly.
All of our cooperators are large mower
companies or agricultural equipment companies, such as Badboy Mowers,
Wood-Mizer, Caterpillar, etc.
Because of the long term cooperation, we
could supply our customers not only the products but also our recommendation on
the designs to saving costs.
Ductile Iron Spindle Assembly,Cast Iron Spindle Assembly,Scag Spindle Bearing Replacement,Scag Spindle Pulley Removal SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com
1. How to eliminate the reverse rotation of the three-phase compressor motor?
This situation is caused by wiring errors, as long as you can swap two lines of the three phases to solve the problem!
2. How to judge the short circuit of the compressor motor winding?
You can choose the R×1 file for the multimeter. After zero adjustment, measure the resistance value of the CR or CS of the compressor motor winding of the thermal shock box. If the resistance of the measured winding is less than the normal value, it can be judged that the winding is short-circuited!
3. How to judge the compressor motor to touch the ground?
Hold one pen firmly against the common point, and another meter pen to tighten the metal part of the compressor process tube, or take a small piece of the outer skin of the outer panel for measurement. If the resistance value is small, it can be judged that the winding or internal wiring touches the ground!
4. How to eliminate the “beep†sound of the three-phase compressor motor during operation?
If the cold and hot shock box compressor motor emits a "beep" sound during operation, it is caused by a serious imbalance of three phases, and there is a phase loss of the phase power supply. As long as the three phases are restored, the problem can be solved!
5. How to deal with the burning of the compressor terminal?
First clean up the burnt press pins, then connect the previously prepared copper tube plugs to the line and gently tap them in with pliers. The copper tube plug is made of 8 angles, which can be solved by pressing the shaping on the foot of a good presser beforehand! 