The best way to solve common faults in mineral processing equipment
Among the whole set of mineral processing production lines, there are many reasons for the failure of the mineral processing equipment. Environmental factors, material conditions, quality of the relevant operators, management level, human-machine linkage, human factors, the quality of the equipment itself, etc. may cause the mineral processing equipment to malfunction. . In the event of a fault in the ore dressing equipment, the cause of the failure of the ore dressing equipment must be identified, and a reasonable solution should be made for the cause.
The best ways to solve common faults in mineral processing equipment are:
1. The coupling bracket bolts are loose and the bearing housing bolts are loose.
Solution; view and stabilize the bolts.
2, transmission organization noise is large
Solution: The gears are smooth and short.
3. Gear spacing changes.
Solution: Add smooth grease and stabilize the bolts.
4, broken oil or seal damage
Solution: Repair and clean the valve for a long time with less repair and cleaning, refueling or replacing the seal according to the rules.
During crane operation, a frequency inverter is an effective tool to control the rotational speed of the three-phase asynchronous motor. It is critical to ensure a safer, more stable running of the crane. We offer standard product lineups as well as custom options.
Functional
Frequency Inverter,Crane Frequency Inverter,Frequency Converter Device
Eurocrane (China) Co., Ltd. , https://www.craneparts.pl