Artificial Intelligence
Pneumatic Cement Charging Machine for Sale
Model NO.: WG
Load Capacity: 5m³/8m³
Output Capacity: >1.2t/Min
Motor: 18.5kw
Operating Pressure: 0.19MPa
Discharge Pipe Dia.: 100mm
Powder Remain Ratio: Less Than 0.4%
After-Sales Service: Overseas Service Center with Sufficient Engineers
Warranty: One Year
Trademark: FOCUS
Transport Package: Standard Packing for International Transport
Specification: ISO9001: 2008 standard
Origin: Zhengzhou, China
HS Code: 8428200000
Model NO.: WG
Load Capacity: 5m³/8m³
Output Capacity: >1.2t/Min
Motor: 18.5kw
Operating Pressure: 0.19MPa
Discharge Pipe Dia.: 100mm
Powder Remain Ratio: Less Than 0.4%
After-Sales Service: Overseas Service Center with Sufficient Engineers
Warranty: One Year
Trademark: FOCUS
Transport Package: Standard Packing for International Transport
Specification: ISO9001: 2008 standard
Origin: Zhengzhou, China
HS Code: 8428200000
Why would you use our pneumatic cement conveyor?FOCUS pneumatic cement conveyor (cement horizontal feeder or cement charger) is an uniquely structured pneumatic conveying equipment, which uses fluidized pressure delivery technology. It is widely applicable in remote construction sites (concrete batching plant) where bulk cement carrier(truck) is not reachable, whereas bulk cement or bag cement are much available.
What are the main features of pneumatic cement conveyor?
1. It is pneumatic powder conveying equipment with advanced structure, adopting fluidized pressure delivery technology and unique fluidized bed design;
2. Applicable to transport cement, grain, coal-ash, lime powder, barite, powder Resin and other non-sticky or granular materials, high blow-off efficiency;
3. The discharging point is adapted for alternating with bulk cement carrier(truck carrier), main components and spare parts are interchangeable between those two kinds of equipment;
4. Large capacity, high utilization, convenient installation and operation, light and compact designed, very popular in concrete batching plants for feeding powder materials (cement, fly-ash etc. ) into cement silos.
Â
| Model | WG5 | WG8 | unit |
| Tank volume | 5 | 8 | m³ |
| Power | 18.5 | 18.5 | Kw |
| Blow-off efficiency | >1.2 | >1.2 | t/min |
| Remain rate | <0.4 | <0.4 | % |
| Operating pressure | 0.19 | 0.19 | mpa |
| Rated transmission capacity | 70 | 90 | t/h |
| Transport distance(vertical) | >50 | >50 | meter |
| Power source | 380v, 50hz, 3 phase | ||
| Weight | 1600 | 1800 | Kg |
| Overall dimension(LxWxH) | 2600x2000x2500 | 3200x2300x2630 | mm |
| Pneumatic source (air compressor) | |||
| Compressor model | WB5.4/2 | WB5.4/2 | Â |
| Discharge capacity | 5.2 | 6 | m³/min |
| Pressure rating | 0.2 | 0.2 | mpa |
| Air supply weight | 500 | 500 | kg |
| Air supply dimension(LxWxH) | 1300x714x916 | 1300x714x916 | mm |
| Motor | Y180M-4-B3 | Y180M-4-B3 | Â |
FOCUS pneumatic cement conveyor (cement horizontal feeder or cement charger) is an uniquely structured pneumatic conveying equipment, which uses fluidized pressure delivery technology. It is widely applicable in remote construction sites (concrete batching plant) where bulk cement carrier(truck) is not reachable, whereas bulk cement or bag cement are much available.
What are the main features of pneumatic cement conveyor?
1. It is pneumatic powder conveying equipment with advanced structure, adopting fluidized pressure delivery technology and unique fluidized bed design;
2. Applicable to transport cement, grain, coal-ash, lime powder, barite, powder resin and other non-sticky or granular materials, high blow-off efficiency;
3. The discharging point is adapted for alternating with bulk cement carrier(truck carrier), main components and spare parts are interchangeable between those two kinds of equipment;
4. Large capacity, high utilization, convenient installation and operation, light and compact designed, very popular in concrete batching plants for feeding powder materials (cement, fly-ash etc. ) into cement silos.
Â
| Model | WG5 | WG8 | unit |
| Tank volume | 5 | 8 | m³ |
| Power | 18.5 | 18.5 | Kw |
| Blow-off efficiency | >1.2 | >1.2 | t/min |
| Remain rate | <0.4 | <0.4 | % |
| Operating pressure | 0.19 | 0.19 | mpa |
| Rated transmission capacity | 70 | 90 | t/h |
| Transport distance(vertical) | >50 | >50 | meter |
| Power source | 380v, 50hz, 3 phase | ||
| Weight | 1600 | 1800 | Kg |
| Overall dimension(LxWxH) | 2600x2000x2500 | 3200x2300x2630 | mm |
| Pneumatic source (air compressor) | |||
| Compressor model | WB5.4/2 | WB5.4/2 | Â |
| Discharge capacity | 5.2 | 6 | m³/min |
| Pressure rating | 0.2 | 0.2 | mpa |
| Air supply weight | 500 | 500 | kg |
| Air supply dimension(LxWxH) | 1300x714x916 | 1300x714x916 | mm |
| Motor | Y180M-4-B3 | Y180M-4-B3 | Â |
Initiators, also known as free radical initiators, can be used to trigger free radical polymerization and copolymerization reactions of alkenes and dienes monomers, and can also be used for unsaturated polyester crosslinking curing and polymer crosslinking reactions. Initiator, polymerization initiator, initiator price, initiator manufacturer, resin initiator
It can be used for polymerization of ethylene, styrene, acrylonitrile, acrylic ester and methacrylate. Can also produce low density polyethylene initiators, also suitable for curing unsaturated polyester, vinyl ester and acrylic thermosetting resins. Individual types of initiators have red indicators to observe the degree of cure
Initiator,Styrene Polymerization Copolymerization Initiator,Up Resin Initiator,Bulk Di-tert-butyl Peroxide
Jiangyin Thousands Chemicals Co. , https://www.wqhxcomposite.com