HONYPRO®Polyethylene PE profiles are typical thermoplastics, which are odorless, tasteless, non-toxic, flammable white powders. The molded PE resins are extruded and granulated waxy pellets with a milky white appearance. Its molecular weight is in the range of 10,000 to 100,000.
Those with a molecular weight of more than 100,000 are ultra-high molecular weight polyethylene. The higher the molecular weight, the better its physical and mechanical properties, and the closer it is to the required level of engineering materials. However, the higher the molecular weight, the more difficult it is to process. The melting point of polyethylene is 100-130C, and its low temperature resistance is excellent. It can still maintain good mechanical properties at -60°C, but the use temperature is 80~110°C.
The main molding conditions of PE profiles
Since PE is a crystalline polymer, the crystal grains absorb a certain amount of heat during melting, so the temperature of the barrel should be 10 degrees higher than its melting point. For LDPE, the barrel temperature is controlled at 140-200°C, and the barrel temperature of HDPE is controlled at 220°C, the minimum value is taken at the rear of the barrel, and the maximum value is taken at the front end.
Polyethylene (PE) is low cost, versatile, and generally easy to process, making it one of the most popular thermoplastic compounds in use today. As a leading plastic profile extruder, Hony Plastics works with standard polyethylene compounds including HDPE, MDPE and LDPE. We manufacture a wide variety of polyethylene extruded profiles including tubing, channels, fittings and other custom parts.
Pe Profiles,Pe Rigid Extrusion Coextrusion Profile,Pe Plastic Diffuser Extrusion Profile,Pe Channel Trim Plastic Profiles,PE Hony Engineering Plastics Limited , https://www.honyplastic.com
Under the action of atmosphere, sunlight and oxygen, polyethylene will age, discolor, crack, become brittle or pulverized, and lose its mechanical properties.
At the molding processing temperature, due to oxidation, the melt hardness will decrease, discoloration and streaks will appear, so attention should be paid to the molding processing and use process or material selection. Because polyethylene has the above characteristics and is easy to process and shape, the recycling of polyethylene has very far-reaching value.
Cylinder temperature: The temperature of the barrel is mainly related to the density of PE and the melt flow rate. It is also related to the type and performance of the injection molding machine and the shape of the primary plastic part.
Mold temperature: Mold temperature has a great influence on the crystallization status of plastic parts. High mold temperature leads to high melt crystallinity and high strength, but the shrinkage rate will also increase. Usually, the mold temperature of LDPE is controlled at 30°C to 45°C, while the temperature of HDPE is correspondingly higher by 10°C to 20°C.
Molding pressure: Increasing the injection pressure is beneficial to the filling of the molten material. Since PE has good fluidity, except for thin-walled and slender products, a lower injection pressure should be carefully selected. The general injection pressure is 50-100MPa. The shape is simple. For larger plastic parts behind the wall, the injection pressure can be lower, and vice versa.
Drying: No drying required if stored properly.
Melting temperature: 220~260C. For materials with larger molecules, the recommended melting temperature range is between 200 and 250C.
Mold temperature: 50~95C. Plastic parts with a wall thickness below 6mm should use a higher mold temperature, and plastic parts with a wall thickness above 6mm should use a lower mold temperature.
The cooling temperature of PE profiled parts should be uniform to reduce the difference in shrinkage. For optimal machining cycle times, the cooling channel diameter should be no less than 8mm and should be within 1.3d of the mold surface (where 'd' is the cooling channel diameter).
Here is a rewritten and improved version of the provided content in English, with additional details to reach over 500 characters and presented as a natural, human-written text:
---
**Product Specifications:**
- **Model No.:** 20mm
- **Molding Style:** Forging
- **Application:** Power
- **Heat Treatment:** Tempering
- **Forging Tolerance:** ±0.5mm
- **Certification:** ISO 9001:2008
- **Trademark:** Goliker
- **Specification:** As per drawing
- **Processing Object:** Metal
- **Molding Technique:** Die Forging
- **Material:** Steel
- **Surface Treatment:** Hot Galvanized
- **Standard:** BS
- **Steel Grades:** Carbon Steel, Alloy Steel
- **Packaging:** Shipping + Pallets
- **Origin:** China
**Protective Power Fittings**
**Trade Mark:** Goliker
**Manufacturing Process:** Hot Forging
**Material Options:** Carbon steel, alloy steel, and more
**Size:** Customized according to drawings
**Standards:** DIN, ASTM, BS, JIS, GB, AISI, ANSI, GOST
**Heat Treatment:** Tailored based on mechanical requirements
**Machining:** Optional
**Surface Finishes:** Plain, sand blasted, HDG, zinc plating, Dacromet, black, paint, powder coating
Our main product lines include container accessories, railway components, construction forgings, hardware tools, and power fittings. With over 10 experienced engineers and technical staff, along with more than 50 skilled forging workers, we ensure high-quality production. Our state-of-the-art facilities are equipped with 300-ton, 400-ton, 630-ton, and 1,000-ton electric screw presses, as well as various other machinery such as horizontal lathes, CNC lathes, drilling machines, grinders, and stamping machines. This allows us to offer comprehensive services from forging to final processing.
With an annual output exceeding 10,000 tons, Goliker has built strong partnerships with numerous large enterprises both domestically and internationally. We are committed to delivering reliable, high-performance products tailored to our customers’ needs.
---
Let me know if you'd like this adapted for a specific platform or audience.